Ubiquiti Discovery For Mac

21-04-2021 by



Ethernet Cable

Ubiquiti UniFi devices (UBNT-UniFi-MIB) Popular SNMPv2 template for monitoring Ubiquiti UniFi devices exposing UBNT-UniFi-MIB (The UniFi MIB module for Ubiquiti Networks, Inc.) entities.It supports low-level discovery for network, radio and virtual access point interfaces.

System Requirement

Web Browser: Google Chrome (Other browsers may have limited functionality.)

LED

White

Factory defaults.

Flashing White

Initializing.

Alternating White/Blue

Device is busy; do not touch or unplug it. This usually indicates that a process such as a firmware upgrade is taking place.

Blue

Device is working properly.

Shutdown Button

Press the Shutdown button to initiate a graceful shutdown (all services will be shut down and the CPU will remain active). After pressing the button, wait until the LED goes off, and then unplug the Cloud Key.

Ethernet Port

This Gigabit Ethernet port is used to connect the power and should be connected to the LAN and DHCP server. Power can be provided by an 802.3af PoE switch, such as the UniFi PoE Switch.

Reset Button

The Reset Button serves two functions:

  • Restart Press and release the Reset button quickly.
  • Restore to Factory Default Settings Press and hold the Reset button for more than five seconds.

USB Type C Power Port

Optional power source (5V, minimum 1A) if PoE is not available.

microSD Slot

This slot is used to back up the Cloud Key configuration to the microSD card (included).

  1. Download UBNT Device Discovery Tool version 1.1.0 for PC - free download UBNT Device Discovery Tool for PC/Mac/Windows 7,8,10, Nokia, Blackberry, Xiaomi, Huawei, Oppo - free download UBNT Device Discovery Tool Android app, install Android apk app for PC, download free android apk files at.
  2. It has a nice speed test option, and scans for other devices on the network, showing you open ports and the ping response time for each. It also shows the apparent public IP address along with the name of the ISP. A great replacement/upgrade for the UBNT Discovery app! Someone gave this a bad review because it isn’t a Wi-Fi.

Use an 802.3af-compliant switch, such as a UniFi Switch, or a USBpower source (not included).

Ubiquiti discovery for mac mojave

UniFi Switch

Ubiquiti Discovery For Mac

OR

Ubiquiti Discovery For Mac Catalina

USB Power Source

The UniFi Controller software is pre-installed on the UniFi Cloud Key. Use one of the following methods to launch the software:

Ubiquiti Discovery For Mac Os

  • If you are using Chrome, go to the Chrome Instructions section (recommended).
  • If you are using a different web browser, go to the Instructions for Other Web Browsers section.
For

Chrome Instructions

Mac
  1. Ensure that your host system is on the same Layer-2 network as the UniFi Cloud Key.
  2. Launch the Chrome web browser and type https://unifi.ui.com in the address field. Press enter (PC) or return (Mac).
  3. Enter the username and password for your Ubiquiti account. Click Sign In.
  4. Enable the Discover Cloud Key option at the top right.
  5. If the Ubiquiti Device Discovery Tool is already installed, proceed to step 7.

    If the tool is not installed, you will be prompted to add it. Proceed to step 6.

  6. To install the tool:
    1. Click Install.
    2. Click Add app to confirm.
  7. The Ubiquiti Device Discovery Tool will search for the UniFi Cloud Key. Click Adopt in the Cloud Key’s Actions column to continue.
  8. If the Cloud Key firmware is not the latest version, click Upgrade Firmware to upgrade the firmware.
  9. Click Open Controller Wizard to set up the Controller on the Cloud Key.
  10. The UniFi Setup Wizard screen appears. Follow the on-screen instructions. Then, click Finish to save your changes.

    Note: For step-by-step instructions, refer to the User Guide, which is available at ui.com/download/unifi

  11. Enter your ui.com account credentials and click Enable Cloud Access.
  12. Go back to the UniFi Controller tab (https://unifi.ui.com) in your browser and wait for the UniFi Controller to be adopted.
  13. Click Launch to open the UniFi Controller remotely.

The UniFi Controller management interface will appear. You can manage your UniFi devices and view network statistics using the UniFi Controller management interface.

For information on configuring and using the UniFi Controller software, refer to the User Guide located on our website: ui.com/download/unifi

Instructions for Other Web Browsers

  1. Ensure that your host system is on the same Layer-2 network as the UniFi Cloud Key.
  2. The UniFi Cloud Key is set to DHCP by default, so it will try to automatically obtain an IP address. Assign a specific IP address to the UniFi Cloud Key, or check the DHCP server for its IP address.

    3. Note: The default fallback IP address of the UniFi Cloud Key is 192.168.1.30.

  3. Launch the web browser. In the address field, type https:// followed by the appropriate IP address. Press enter (PC) or return (Mac).
  4. Click Manage to run the UniFi Setup Wizard.

    5. Note: You can click Configure to change the settings of the UniFi Cloud Key. The default login is ubnt/ubnt.

  5. The UniFi Setup Wizard screen appears. Follow the on-screen instructions. Then, click Finish to save your changes.

    6. Note: For step-by-step instructions, refer to the User Guide, which is available at ui.com/download/unifi

After the UniFi Setup Wizard is finished, the UniFi Controller management interface will appear. Log in with the Admin Name and Password that you created, and then you can manage your UniFi devices and view network statistics using the UniFi Controller management interface.

Ubnt Discovery Tool

For information on configuring and using the UniFi Controller software, refer to the User Guide.

UC-CK

Dimensions

21.7 x 43.4 x 121.9 mm
(0.85 x 1.71 x 4.80')

Weight

110 g (3.88 oz)

Networking Interface

(1) 10/100/1000 Ethernet Port

Buttons

(1) Reset to Defaults

Shutdown

Power Method

PoE48V 802.3af or
Passive PoE (Pairs 4, 5+; 7, 8-)
USB-C5V

Power Supply

802.3af PoE or
USB-C 5V, Minimum 1A

Max. Power Consumption

5W

Operating Temperature

0 to 40° C
(32 to 104° F)

Operating Humidity

20 to 90% Noncondensing

Certifications

CE, FCC, IC

BrowserCam offers you Ubiquiti Device Discovery Tool for PC (Windows) download for free. undefined. produced Ubiquiti Device Discovery Tool application for Google's Android in addition to iOS nevertheless you can install Ubiquiti Device Discovery Tool on PC or computer. You'll notice few really important points listed below that you have to carry out before starting to download Ubiquiti Device Discovery Tool PC.

Ubiquiti Discovery For Mac Osx

How to Download Ubiquiti Device Discovery Tool for PC or MAC:

  • Download BlueStacks free emulator for PC with the link made available in this particular webpage.
  • Right after the installer finishes downloading, open it to begin the set up process.
  • Move forward with the easy installation steps by clicking on 'Next' for a few times.
  • While in the very last step click the 'Install' option to start the install process and then click 'Finish' anytime it is finished.On the last and final step please click on 'Install' to get you started with the actual install process and after that you can mouse click 'Finish' to finish the installation.
  • From the windows start menu or maybe desktop shortcut begin BlueStacks emulator.
  • In order to install Ubiquiti Device Discovery Tool for pc, you need to connect BlueStacks App Player with Google account.
  • Congratulations! It's easy to install Ubiquiti Device Discovery Tool for PC by using BlueStacks App Player either by searching for Ubiquiti Device Discovery Tool application in google playstore page or simply by using apk file.It is time to install Ubiquiti Device Discovery Tool for PC by going to the Google play store page once you've got successfully installed BlueStacks program on your computer.




Laser Printer All In One For Mac
Format Usb For Mac And Pc Disk Utility

Comments are closed.